Damp pellets: signs and what to do
Pellets start out dry. Pellets can be produced with a low moisture content, below 10%1. Damp pellets are pellets that have lost that dryness, and you can usually see it if you know where to look.
What moisture does to a pellet
Think back to how a pellet is held together: pressure and wood's own glue. Water works against both. Wikipedia says that a little water makes wood pellets swell and fall back into sawdust1.
A forestry agency says the same about stored wood pellets. They can absorb moisture and will crumble to sawdust, and they'll also expand while they do it2. A grill maker puts it in kitchen terms. Moisture can expand the wood and make it crumbly3.
Pause and check. If a pellet swells, what happens to its shape? It grows, and then it breaks down. Keep that picture in mind for the signs below.
Signs to look for
The sources don't give a full checklist, so this one is built from what they do say.
- Dull, not shiny. One maker says a good pellet has a nice sheen3. A pellet that's lost its shine is worth a second look.
- Crumbles when you break it. The same page says a pellet broken in half should give a clean snap with no crumbling3. Crumbling suggests moisture got in.
- Lots of sawdust, or clumped sawdust. A little dust at the bottom of a bag is normal. A lot of it, or dust that has stuck together in lumps, may mean the pellets were compromised3.
- Swollen pellets. Since water makes pellets expand1, pellets that look puffed or fatter than the rest are a warning.
None of these tells you the exact amount of water in a pellet. They're clues, not a measurement. If your grill's manual describes how to judge pellet condition, trust it over this list.
Why the grill cares
Here's the chain. A motor-driven auger feeds a small amount of pellets from the hopper to the fire pot4. The hopper is the box that holds the pellets, and the fire pot is where they burn.
That system expects solid pellets. The maker warns that crumbs may clog the auger, and that the grill might not light3. Notice the hedge: "may" and "might." The source doesn't say damp pellets always cause a jam.
What to do
Take it in order.
Stop using the damp ones. Crumbs from those pellets are the maker's worry3. Leaving suspect pellets out of the hopper is the cautious choice. Your grill's manual has the final say on what to do about a jam or a failed start.
Take them out of the hopper when wet weather is coming. The same page says that long rain or high humidity in the forecast is the time to empty the hopper and seal the pellets away3. More on that in the hopper page.
If a new bag looks wrong, return it. The maker says new bags sometimes get compromised during shipping, and it suggests taking them back to the retailer or contacting customer support3.
Store the rest properly. Dry and airtight is the rule, and the details are on the storage page.
Can you dry them out?
The sources behind this page don't describe a way to dry swollen pellets, so this page doesn't offer one. Because swollen pellets expand and turn back toward sawdust, it's reasonable to expect that drying wouldn't restore them, but that's an inference, not something a source says. If you're unsure about a batch, ask your grill maker.
A short test of what you've learned
Say the chain out loud. Moisture gets in. The wood expands and goes crumbly. The crumbs can clog the auger, and the fire may not start. If you can say that, you can read the signs and know why they matter.
References
- Pellet fuel, Wikipedia
- Woodfuel storage, Forest Research (UK)
- How to Store Wood Pellets, Traeger Grills
- Pellet grill, Wikipedia